Product Name
|
Motorcycle Gear & Chain Kit 420 428 520 525 530
|
Material
|
Alloy Steel
|
Chain NO
|
420 428 520 525 530
|
Pitch (mm)
|
12.7
|
Bush Type
|
Solid
|
Width(mm)
|
7.85
|
Pin Dia.(mm)
|
4.45
|
Pin Length(mm)
|
19.05
|
Roller Dia(mm)
|
8.51
|
Plate Thickness Inner(mm)
|
1.96
|
Plate Thickness Outer(mm)
|
1.96
|
Tensile Strength(kn)
|
20.6
|
Weight(kg/m)
|
0.85
|
Introducing the SFR Super O-Ring Chain, a marvel in light-weight engineering that redefines high-performance sealing chains. This innovative chain maintains unparalleled strength while significantly reducing width and weight. Our optimized O-ring technology triumphs over the limitations of conventional sealing chains, extending the lifespan by an impressive 150% compared to ordinary O-rings.
Available in striking color configurations: choose between a sleek Silver outer with Black inner or a luxurious Golden outer with Black inner. Make your motorcycle stand out with these premium choices. Designed for high wear-resistance, these chains promise durability and longevity. Enjoy maintenance-free lubrication with our cost-effective O-rings, ensuring a smooth, hassle-free riding experience.
Semi-Automatic PET Bottle Blowing Machine, Bottle Making Machine, and Bottle Moulding Machine: The ultimate PET Bottle Making Machine for crafting PET plastic containers and bottles in a myriad of shapes.
We strongly recommend lubricating a new connecting link before connecting both ends of the new chain (Fig. B). For clip-type connecting links (FJ, RJ), ensure the open end of the clip is set opposite to the chain drive direction (Fig. C). The FJ-type connecting link features Press Fit Outer Plates which necessitates the use of the SFR Cutting & Riveting Tool to press on the side plates. For rivet-type connecting links (ZJ), utilize the MOTOMAX KM500R Cutting & Riveting Tool to accurately press fit the connecting link plates and precisely rivet the pin head according to our recommended flare dimensions. For chain sag adjustment, adhere to the recommendations in your motorcycle owner's manual. The standard chain sag with the load of riders is 10 mm (Fig. D).
1. Always consult your distributor/local dealer or refer to the SFR chain catalogue or application chart to verify if this chain and connecting link are suitable for your motorcycle. Improper selection and use can result in severe damage or injury.
2. Cut the old chain at its joint part. If your motorcycle is equipped with an endless chain or a chain with a rivet-type connecting link (ZJ), use the SFR Cutting & Riveting Tool or a similar cutting tool.
3. Attach the new chain to the end of the old one using a new connecting link. By rotating the rear wheel, the new chain will move into position (Fig. A).
The drive chain is a crucial safety component for motorcycle operation. To ensure a safe ride, we kindly request you to carefully read and follow your motorcycle owner's manual along with the following instructions.
SFR Chain Group SFR Chain Group has ascended to the pinnacle of the industrial chain industry, securing a leading position since the last century.
With uncompromising quality controls, we continually surpass our customers' expectations in both quality and service. Our exceptional products are distributed to over 80 countries, catering to every industry that demands movement, conveyance, lifting, or power transmission.
Our Services & Strength
Boasting a monthly production output exceeding 2.2 million pieces, SFR motorcycle chain stands as the flagship product of our group. As one of the premier manufacturers of motorcycle chains globally, we proudly serve some of the most prestigious brands in the automotive sector. Our extensive range ensures we have the perfect chain for every power and application, from urban mopeds to high-powered racing motorbikes, dirt bikes, and ATV quads.
1. Are you manufacturer or trade Company?
We are a factory focused on producing and exporting Chain over 30 years,operate four fully owned factories and a joint venture, all certified by the prestigious ISO9001 and IATF 16949 Quality Management System.
2. What terms of payment you usually use?
T/T 30% deposit and 70% against document,T/T full payment, L/C at sight.
3. What is your lead time for your goods?
Normally 30~45 days.Stock can be shipped immediately.
4. Do you attend any exhibition?
We attend exhibition in Germany, Italy, France, Russia, China and other motorcycle and industrial chain exhibition.
5.Is sample available?
Yes,sample is available.
6.Is OEM available?
Yes, OEM is available.